GU-INS Inertial Navigation System GPS

GU-INS ( Inertial Navigation System ) con GPS

• GAUI GU-INS supports X-type flying Quad-copter (GAUI 330X, 500X), it can be extended for use on Hexa-copter, Octo-copter etc…. (Please reference GAUI product version/optional purchase module).

• OSD (On-screen display, optional purchase module) electronics can be connected to GU-INS, which provides precise data monitoring on altitude, distance, position, attitude and battery voltage.

• Onboard USB interface connector for firmware update.

• Interface provided to connect with standard receiver and JR satellite receiver.

• Specifications:
• Dimensions:Main controller: 53.5 x 38.5 x 12mm
  GPS antenna: 42 x 34 x 15mm
  Weight:Main controller: 27g (w/o cables ), GPS antenna: 23g (with cable)
• Frequency: 300Hz output to ESC
• Operating temperature: -20~80°C
• Operating modes: Rate (manual) mode, Auto balance mode, GPS positioning mode.
• Rate (manual) mode: Max angular velocity: 300 degree/sec
• Auto balance mode: Max tilt angle: 60 degree.
• GPS positioning mode:
• Hovering accuracy: Horizontal: ±2m, Vertical: ±0.5m
• Max yaw angular velocity: 250 degree/sec
• Max tilt angle: 45 degree.
• Max horizontal speed: 10 m/s,36 km/hr
• Max vertical speed: 8 m/s (horizontal posture)
• GU-INS provides pitch and rolls output signals, can work with different types of camera mounts.
• Fail-safe functions: Automatic Go-Home, Signal lost Go-Home, Low voltage protection.
• Suitable wind condition: < 10 m/s

Features:

• Easy to install and setup, no need of software on PC for adjustment.
• All functions can be setup & confirmed by LED lights indication.
• All in one design (combined inertial measurement unit and main controller) with simple cable wiring.

GAUI GU-INS MANUAL DOWNLOAD